Frequently Asked Questions
A. About SunFleet
SunFleet is Suncom’s modular system for renewable industrial heat. It can consist of SunArc solar collectors, Power-to-Heat modules, SunTES thermal storage and SunCore Intelligence control, and is tailored to the heat demand and existing infrastructure of each industrial site. The exact combination and scale are determined for each project.
SunFleet is designed for industrial heat from 100 °C to 475 °C and can supply steam, hot water, hot air or thermal oil. This suits processes such as cooking, pasteurisation, drying, cleaning, frying, washing and curing. The achievable temperature depends on the configuration, heat transfer medium and process requirements.
SunTES stores heat when it is available and supplies it to the process later. Power-to-Heat can also convert electricity into heat when this is technically and economically favourable. The existing heat supply can remain available in parallel for supplementary capacity or back-up.
Yes. Concentrated solar thermal technology can also supply industrial heat in the Netherlands. Annual output depends on local solar irradiation, orientation, available space, system design and the required temperature. Storage and supplementary heat sources help align heat production with demand.
Yes, SunFleet is designed to connect to existing steam, hot-water, hot-air or thermal-oil systems. Each site is assessed to determine which modifications are required to pipework, heat exchangers, control systems or the boiler house.
B. Technology and grid connection
In many cases, yes, depending on the site’s heat profile and available electrical capacity. Solar heat does not require additional electrical transport capacity. Power-to-Heat does use electricity, but thermal storage makes it possible to produce heat at times when sufficient capacity is available within the existing connection.
A standalone electric boiler produces heat when electricity is consumed. Power-to-Heat with thermal storage can produce heat when sufficient electrical capacity is available or electricity prices are favourable, and supply that heat to the process later. This creates greater flexibility in the charging and consumption profile.
Yes. A heat pump can be efficient when a suitable heat source is available and the required temperature lift is limited. SunFleet can provide supplementary heat or supply heat at a higher temperature level. The optimum combination is determined through a site and process analysis.
C. Costs, financing and subsidies
Under Heat as a Service, the customer purchases usable heat through a long-term agreement without buying the entire system. Suncom develops, finances, owns, operates and maintains the system. The exact pricing, performance and availability arrangements are defined contractually for each project.
Under the Heat as a Service model, Suncom remains the owner of the system. The accounting treatment may depend on the final contract terms and applicable reporting standards. Customers should therefore have the accounting treatment assessed by their own financial adviser.
Responsibilities for operation, maintenance, availability and performance are set out in the agreement. Under Heat as a Service, Suncom retains operational responsibility for SunFleet within the limits and service levels defined in the contract.
Yes. In addition to Heat as a Service, SunFleet can be purchased as a turnkey system. The customer then invests in the system and becomes its owner. The choice depends on available financing, desired ownership, risk appetite, subsidies and the preferred allocation of operational responsibilities.
The price is determined by factors including annual heat demand, required capacity, target temperature, storage capacity, available space, integration with the existing installation and civil works. After an initial assessment, Suncom can prepare a project-specific configuration and business case.
The financial outcome differs per site. Key factors include avoided gas and CO₂ costs, electricity prices, solar yield, operating hours, financing structure, maintenance, subsidies and the amount of fossil heat actually replaced. Suncom therefore calculates a project-specific business case using a measured or validated heat profile.
It may be, depending on the configuration. Solar thermal energy may fall under an SDE++ renewable heat category, and electric boilers and other technologies may fall within specific categories. Conditions, capacity thresholds and documentation differ by funding round, so check the current information published by RVO and have the project configuration reviewed before applying.
D. Projects and implementation
An initial suitability assessment considers heat demand, temperature, operating hours, the current energy source, available space, the grid connection and integration with existing utilities. Based on these data, Suncom can determine which SunFleet configuration best matches the initial technical and commercial conditions.
A project starts with an assessment of the heat demand, site and existing infrastructure. This is followed by system design, selection of the commercial model, permits and any subsidy applications. After engineering, procurement and construction, the system is commissioned, monitored and maintained.
Installation is planned to minimise disruption to production. Specific connections or activities may require a scheduled production shutdown. The required duration and phasing are agreed with the customer for each site.
Complete the project form or contact Suncom directly. For an initial assessment, the key information is the required form of heat, temperature and pressure, annual heat consumption, load profile, operating hours, current energy source, available electrical capacity and available space. You can email info@suncom-energy.com, call +31 30 785 7228 for the Netherlands, or call +34 711 225 815 for Spain.
